|
|
|
|
|
#8 Carefully peel off liner making
sure film stays on the glass |
#9
Slowly peel back, (spray the film while peeling) |
|
|
|
|
#11 Pull the liner down evenly until
you are 2" from bottom edge |
#12 Make sure your hands and fingers
are clean, before touching the film dip water |
|
|
|
|
#13 Remove film and liner from
outside of glass, be careful not to let the liner come off the film the
rest of the way |
#14 Place tint on the glass 1/16"
from the edge on the top of the glass |
|
|
|
|
#15 Spray solution on tint and
squeegee water from tint starting at the top and working toward the
edge. Work halfway down, wrap paper towel around squeegee and squeegee
top edge pushing upward to absorb water (as shown in figure #23) |
|
#16 Roll window all the way up
( Back
Next ) |
